Erfurt MAV Wallrock Fibreliner Original Lining Paper - Double Roll
Erfurt MAV Wallrock Fibreliner Original Lining Paper - Double Roll
Couldn't load pickup availability
Wallrock Fibreliner Original is a no nonsense lining paper, known for its strength, durability, and ease of application. Its great for covering up damaged surfaces and reinforcing problem areas like cracked plaster or wood panelling, and will help to reinforce your wall surface, in most cases stopping the cracks reappearing completely. This is the lining paper of choice for many professional and DIY decorators as it is quick and very easy to hang, and doesn't need soaking time like standard lining papers do. It has a slightly textured finish.
- Paste the wall or the paper
- Easy to hang
- Contains textile fibres for added strength and durability
- Disguises imperfections
- Perfect surface for paint or decorative wallpaper
- Reinforces and smooths damaged walls and ceilings
- Tough and durable
- Allows walls to breathe
- Contains no pvc
- Dry strippable
- Uses paper from well managed sources
- Fire rated B-s1,d0
- Recommended adhesive: Wallrock Power Adhesive
- 3 roll sizes available
Double length: 20m x 55cm coverage: 11m² approx
Double length: 20m x 75cm coverage: 15m² approx
Double length: 20m x 100cm coverage: 20m² approx
Hanging Instructions
Hanging Instructions
Wallrock Fibreliner
Wallrock Fibreliner offers two surface finishes. The outer surface of the roll offers an improved finish for either painting or over hanging with wallpaper. We recommend that the inner surface of the roll is applied to the wall.
1. Cut all lengths required allowing extra for trim at each end, or simply hang directly from the roll onto a pre-pasted wall or ceiling. Apply the inner surface to the wall. Please note Wallrock Fibreliner can also be hung horizontally, especially useful if you intend to overhang with a decorative wallpaper.
2. Mark a guideline with a pencil for the first length, using a plumbline as a guide for vertical drops or a spirit level for horizontal application.
3. If applying the adhesive directly to the wall or ceilings, apply enough to hang one or two lengths at a time, ensuring the paste exceeds the width of the second length. If pasting the material (either side) make sure all edges are covered. With both methods, hang Wallrock Fibreliner Ultra immediately - no soaking is required.
4. Apply the first length along the guideline and smooth out with a wallpaper brush then trim the ends.
5. Butt join all subsequent lengths being careful not to overlap the edges.
6. Allow Wallrock Fibreliner to dry thoroughly before decorating with emulsion paint or overhanging with another wallcovering (normally 24 hours is sufficient).
7. Wallrock Fibreliner Ultra is also ‘dry strippable’ in many applications.
We strongly recommend the use of a good quality ready mixed adhesive, such as Wallrock Power Adhesive, for application of this product.
Share
